INIT:
   ;LCALL  DELAY
   MOV    A,#0E2H              ;SYSTEM P3.4ET
   LCALL  WCOM
   LCALL DELAY
   LCALL DELAY
   
   LCALL DELAY
   MOV    A,#0EBH              ;SET Lcd BIAS RAITO:0EB(1/12)
   LCALL   WCOM
   MOV    A,#081H              ;SET Vbias POTENTIOMETER
   LCALL  WCOM
   MOV A,#065H
   LCALL WCOM
   
    MOV    A,#0AFH               ;SET DISPLYA ON
   LCALL  WCOM
   
   MOV    A,#087H               ;SET PARTIAL  DISPLAY CONTROL DISPLAY
   LCALL  WCOM
   MOV    A,#0F1H              ;SET COM END(127)
   LCALL  WCOM
   MOV    A,#07FH
   LCALL  WCOM
   
   MOV    A,#02FH               ;SET PUMP CONTROL
   LCALL  WCOM
   MOV    A,#02BH               ;SET PANEL  LOADING
   LCALL  WCOM
   MOV    A,#030H               ;SET ADV,PROGRAM CONTROL
   LCALL  WCOM
   MOV    A,#0C0H               ;SET LP3.0 MAPPING CONTROL
   LCALL  WCOM
   MOV    A,#0A3H               ;SET LINE RATE
   LCALL  WCOM
   ;MOV    A,#0A4H               ;SET ALL-PIXEL-ON
   ;LCALL  WCOM
   MOV    A,#0D0H               ;SET GRAY SHADE
   LCALL  WCOM
   
   MOV    A,#024H               ;SET TEMP COMPENSATION
   LCALL  WCOM
   ;MOV    A,#090H               ;SET  FIXED LINES
   ;LCALL  WCOM
   MOV    A,#0F9H               ;SET WINDOW  PROGRAMMING
   LCALL  WCOM
   MOV    A,#0F4H
   LCALL   WCOM
   MOV    A,#000H                ;SET WINDOWS STARTING COLUMN ADDRESS
   LCALL  WCOM
   MOV   A,#0F6H
   LCALL  WCOM
   MOV   A,#07FH
   LCALL  WCOM                  ;SET WINDOWS EDNING COLUMN  ADDRESS
   
   MOV    A,#089H               ;SET RAM ADDRESS CONTROL
   LCALL  WCOM
   
  ; MOV    A,#0AFH               ;SET DISPLYA ON
  ; LCALL  WCOM
   LCALL  DELAY
     RET